|
|
||
|
Choate Recoil Compensator for MINI 14
Part Number 070712 INSTALLATION INSTRUCTIONS 1 - The front sight must be removed by driving out the roll pin and then driving the sight off of the barrel with a brass or copper punch while placing it on a hardwood surface. The sight band can be removed by filing or grinding it in two. This will allow the sight to fall off. 2 - Put the compensator on the barrel and tighten the set screw (shown on bottom of unit)after aligning the sight properly. The alignment must be verified before the next step. 3 - Drill the roll pin hole using one drill size under 1/8, then finish to size with a 1/8 drill. (this process will prevent oversize roll pin hole). There is a predrilled starter hole on the underside of the unit which makes it almost impossible to get the roll pin mis-located. 4 - Since the rifle must be squared up with a level for alignment and the drilled hole must be straight through, we recommend yout local gunsmith for this job. Price: $40.95 In Stock: YES Unlike many other websites, you do not need to enter any personal info to get the shipping charge. As soon as you "ADD TO CART", you can get the shipping charge by entering your zip code. CombatStocks will charge you based on what it will cost us to ship your order to your zip code. November 20, 2009 06:16:26 ET |
|||