| |
| SKS Gas Tube Instructions |
| |
|
| Caution: Make
sure the firearm is not loaded. Remove or open magazine and
examine chamber. Use safe handling procedures at all times. |
| |
|
|
|
|
| |
|
|
Thank you for buying the SKS New Generation Gas Tube. Please note that this unit had been created to eliminate the inconvenience caused by pins and clips associated with the wooden hand guards. It has been desinged to fit many different variations of the SKS and will most certainly require some modifications to enable the lock lever to function. If you experience any difficulty in getting the tube to lock in place, look at the lock lever, just in front of the rear sight assembly. If it appears to be unable to clear due to the tube blocking the the lever, it will require a small amount of filing to clear. Please file the area in small increments to eliminate the possibility of a loose fit.
NOTE: You MUST MAINTAIN the original angle for this to work.
Check your filing often to make sure you don't file away too much of the surface. The end of the tube should retain the same angle as the drawing.
|
| |
|
|
| |
|
|
|
| |
Copyrighted CombatStocks.comTM
September 09, 2010 10:28:24 EDT
|
|
