|
MAKE SURE YOUR SHOTGUN IS UNLOADED BEFORE STARTING
1) Cut out mounting template on the front of
packaging.
2) Place 5 shotgun shells in holder
and position on stock.
3) Locate proper position on stock so
there is no interference with cheek, shoulder, etc. Note: The Shotshell
Holder may be mounted on either side of the stock for both left and
right-handed shooters.
4) Place mounting template where you
wish to mount the Holder and tape it down.
5) Mark the 6 holes through the
template with a sharp object. ie., nail, awl, punch.
6) Drill the 6 holes using a 7/64
drill bit and mount the Shotshell Holder using the six flat head screws
supplied. | 
