Step #1 Remove the bayonet from bayonet
lug.
Step #2 Adjust legs into the “Down
Position”. Depress the “snap-n-lock” button and rotate
leg 90°, then release button.
Step #3 Place the open end of the clamp
onto the rear of the bayonet lug.
Step #4 Orient the locking block over the
front of the bayonet lug. Use the supplied #10x1” phillips screw
to secure the locking block. Do Not Overtighten!
Step #5 Your Advanced Technology, Inc. Bipod
is now in place and ready to use.
Step #6 To adjust legs down, or rearward
simply depress the “Snap-n-Lock” button and rotate leg to the
desired location. Then release the button.
Step #7 To adjust height (inner leg) twist
knurled thumbscrew 1/4 turn and legs will freely drop. Retighten thumbscrew.
To retract legs simply invert rifle and repeat process.
