Fits Mossberg 500/590, Maverick 88, Remington 870, Winchester
1200/1300. |
**MAKE SURE YOUR SHOTGUN IS UNLOADED BEFORE STARTING***
1)
Remove the existing recoil pad from your
shotgun stock by unscrewing the 2 Phillips head screws in the rear of the
pad.
2) Using a long flat blade
screwdriver to remove the stock bolt from the inside of the opening in the
rear of the stock.
3) Select the adapter for your
shotgun. The Mossberg and Maverick require no adapters. The Remington and
Winchester adapters are marked and shown left.
4) Select the mounting bolt supplied
for your shotgun.
5) Place the
bolt, with supplied washer, through the back of the grip and adapter (if
used) and secure to the shotgun receiver by tightening bolt.
6) The stock comes with a sling
swivel stud mounted on the left side for right handed shooters. If you are
left handed, unscrew the sling swivel stud and remove the cap and the
pivot pin, then mount it on the opposite side. |
TO CLOSE: Press the the quick-release button (located on the left side
of the grip), while lifting the stock upward. As the arm closes down on
the barrel, the butt plate will fold flat. The quick-release button will
snap out securely locking the stock in the closed position.
TO OPEN:
Press the quick-release button while lifting the stock away from the
barrel. When the stock is fully open, the button will lock into
position.
The firearm will function in the open or closed position.
Buy the ATI Top Folding Shotgun Stock now, we have the absolute lowest price for this folding stock. |
